Check the car′s braking system is affected. If wheel bearing turning very slowly after installation, you will need to check that the installation is using the right torque. Refer to the vehicle manufacturer′s recommended torque. NSK bearings are not functioning well, change can cause wheel spin slower, and the bearing operating temperature will rise, so as to shorten the service life. If necessary, re-adjusting locking ring located in the channel can be reused?
Cannot. At the time of installation, the locking ring must be updated often is severely damaged during the demolition process. Because of the position of the locking ring to lock the NSK bearings, so it is considered to be safe.
New bearings with a flanged wheel hub (second generation Hub unit) • there is a white plastic ring, before installation if you want to take?
This is to ensure that bearing inner ring is in the correct position in the transport process, must take before installing. Care should be taken when it is pressed out between bearing flanges. If NSK bearings after installation in the appropriate position, the pressure should be directed to. Then use the correct installation method, ensure that the inner ring is not being moved.